Floci on 2 Jul 2026

Where it fell short on this date

The tests this run recorded as failing, each linked to its source at the commit that measured it. For the current picture, see this target's latest results, or every target in this run.

• BatchWriteItem - validation rejects a wrong-typed table key value

  Tier 1 batchWriteItem tests/tier1/batchWriteItem/validation.test.ts:96

• BatchWriteItem - validation rejects a non-scalar table key value

  Tier 1 batchWriteItem tests/tier1/batchWriteItem/validation.test.ts:112

• BatchWriteItem - validation rejects a wrong-typed index key value

  Tier 1 batchWriteItem tests/tier1/batchWriteItem/validation.test.ts:144

• BatchWriteItem - validation rejects a non-scalar index key value

  Tier 1 batchWriteItem tests/tier1/batchWriteItem/validation.test.ts:164

• BatchWriteItem - validation rejects an empty-string index key value

  Tier 1 batchWriteItem tests/tier1/batchWriteItem/validation.test.ts:184

• CreateTable - validation rejects PAY_PER_REQUEST with ProvisionedThroughput specified

  Tier 1 createTable tests/tier1/createTable/basic.test.ts:245

• CreateTable - validation rejects a GSI INCLUDE projection without NonKeyAttributes

  Tier 1 createTable tests/tier1/createTable/basic.test.ts:262

• CreateTable - validation rejects StreamSpecification with StreamEnabled false plus a StreamViewType

  Tier 1 createTable tests/tier1/createTable/basic.test.ts:288

• CreateTable - LSI rejects an LSI INCLUDE projection without NonKeyAttributes

  Tier 1 createTable tests/tier1/createTable/lsi.test.ts:117

• CreateTable - index and stream spec validation rejects a KEYS_ONLY GSI projection carrying NonKeyAttributes

  Tier 1 createTable tests/tier1/createTable/specValidation.test.ts:31

• ConsumedCapacity - single-item ops report only the aggregate, no read/write split a strongly-consistent GetItem reports 1 CapacityUnit and no read/write split

  Tier 1 getItem tests/tier1/getItem/consumedCapacity.test.ts:219

• ConsumedCapacity - single-item ops report only the aggregate, no read/write split a Query under INDEXES omits the split at the top level and on Table

  Tier 1 getItem tests/tier1/getItem/consumedCapacity.test.ts:245

• GetItem - projection validation and fidelity rejects overlapping projection paths (a and a.b)

  Tier 1 getItem tests/tier1/getItem/projectionValidation.test.ts:41

• GetItem - projection validation and fidelity rejects duplicate projection paths (a and a)

  Tier 1 getItem tests/tier1/getItem/projectionValidation.test.ts:58

• GetItem - projection validation and fidelity projects multiple list indices compacted and index-ordered

  Tier 1 getItem tests/tier1/getItem/projectionValidation.test.ts:75

• GetItem - projection validation and fidelity rejects an undefined projection name even when the scan matches nothing

  Tier 1 getItem tests/tier1/getItem/projectionValidation.test.ts:92

• Query - KeyConditionExpression semantics rejects a nested path on a key attribute

  Tier 1 query tests/tier1/query/keyConditionSemantics.test.ts:50

• Query - Select / ProjectionExpression rejections Select ALL_ATTRIBUTES with ProjectionExpression is rejected

  Tier 1 query tests/tier1/query/select.test.ts:235

• Query - Select / ProjectionExpression rejections Select ALL_PROJECTED_ATTRIBUTES without an IndexName is rejected

  Tier 1 query tests/tier1/query/select.test.ts:253

• Query - Select / ProjectionExpression rejections Select COUNT with ProjectionExpression is rejected

  Tier 1 query tests/tier1/query/select.test.ts:270

• Query - Select / ProjectionExpression rejections Select ALL_PROJECTED_ATTRIBUTES with ProjectionExpression and no IndexName is rejected

  Tier 1 query tests/tier1/query/select.test.ts:289

• PutItem - ConditionExpression rejects a BETWEEN with reversed bounds at parse time

  Tier 1 putItem tests/tier1/putItem/conditions.test.ts:249

• PutItem - validation rejects a wrong-typed index key attribute

  Tier 1 putItem tests/tier1/putItem/validation.test.ts:146

• PutItem - validation rejects a non-scalar index key attribute

  Tier 1 putItem tests/tier1/putItem/validation.test.ts:159

• PutItem - validation rejects an empty-string index key attribute

  Tier 1 putItem tests/tier1/putItem/validation.test.ts:175

• UpdateItem - ReturnValues granularity UPDATED_NEW on a nested SET returns only the changed fragment

  Tier 1 updateItem tests/tier1/updateItem/basic.test.ts:725

• UpdateItem - ReturnValues granularity REMOVE with UPDATED_NEW omits Attributes (nothing was set to a new value)

  Tier 1 updateItem tests/tier1/updateItem/basic.test.ts:745

• UpdateItem - expression attribute hygiene rejects ExpressionAttributeNames supplied with no expression

  Tier 1 updateItem tests/tier1/updateItem/expressionHygiene.test.ts:16

• UpdateItem - nested path semantics SET fails when intermediate map path does not exist

  Tier 1 updateItem tests/tier1/updateItem/paths.test.ts:30

• Scan - GSI sparse composite GSI: an item missing the GSI range key is not scanned

  Tier 1 scan tests/tier1/scan/gsi.test.ts:166

• Scan - LSI sparse LSI: an item missing the LSI sort key is not scanned

  Tier 1 scan tests/tier1/scan/lsi.test.ts:135

• Scan - Select / ProjectionExpression rejections Select ALL_ATTRIBUTES with ProjectionExpression is rejected

  Tier 1 scan tests/tier1/scan/select.test.ts:70

• Scan - Select / ProjectionExpression rejections Select ALL_PROJECTED_ATTRIBUTES without an IndexName is rejected

  Tier 1 scan tests/tier1/scan/select.test.ts:85

• Scan - Select / ProjectionExpression rejections Select COUNT with ProjectionExpression is rejected

  Tier 1 scan tests/tier1/scan/select.test.ts:99

• Scan - Select / ProjectionExpression rejections Select ALL_PROJECTED_ATTRIBUTES with ProjectionExpression and no IndexName is rejected

  Tier 1 scan tests/tier1/scan/select.test.ts:115

• Scan - Select / ProjectionExpression rejections Select SPECIFIC_ATTRIBUTES without ProjectionExpression is rejected

  Tier 1 scan tests/tier1/scan/select.test.ts:132

• Scan - validation rejects TotalSegments above the maximum

  Tier 1 scan tests/tier1/scan/validation.test.ts:20

• Export and import - S3 ExportTableToPointInTime initiates an export and reports it

  Tier 2 export tests/tier2/export/exportImport.test.ts:77

• Export and import - S3 ImportTable ingests S3 data into a new table

  Tier 2 export tests/tier2/export/exportImport.test.ts:99

• BatchExecuteStatement - PartiQL partial failure - one valid and one invalid statement

  Tier 2 partiql tests/tier2/partiql/batchExecuteStatement.test.ts:129

• ExecuteStatement - PartiQL SELECT with nested map path

  Tier 2 partiql tests/tier2/partiql/executeStatement.test.ts:255

• ExecuteStatement - PartiQL returns a populated ConsumedCapacity block when requested

  Tier 2 partiql tests/tier2/partiql/executeStatement.test.ts:385

• ExecuteStatement - PartiQL evaluates negated predicates (NOT begins_with, IS NOT MISSING)

  Tier 2 partiql tests/tier2/partiql/executeStatement.test.ts:399

• ExecuteStatement - PartiQL DELETE with a false non-key predicate fails ConditionalCheckFailed and leaves the item

  Tier 2 partiql tests/tier2/partiql/executeStatement.test.ts:428

• ExecuteStatement - PartiQL UPDATE with a false non-key predicate fails ConditionalCheckFailed and leaves the item

  Tier 2 partiql tests/tier2/partiql/executeStatement.test.ts:467

• ExecuteStatement - PartiQL DELETE with a false NOT begins_with predicate fails ConditionalCheckFailed

  Tier 2 partiql tests/tier2/partiql/executeStatement.test.ts:507

• ExecuteStatement - PartiQL DELETE with a true NOT begins_with predicate removes the item

  Tier 2 partiql tests/tier2/partiql/executeStatement.test.ts:527

• ExecuteStatement - PartiQL rejects a write WHERE clause that omits the primary key

  Tier 2 partiql tests/tier2/partiql/executeStatement.test.ts:545

• ExecuteTransaction - PartiQL idempotent replay under the same ClientRequestToken does not double-apply

  Tier 2 partiql tests/tier2/partiql/executeTransaction.test.ts:157

• TransactGetItems - ConsumedCapacity charges 2 read capacity units per item, including a missing item

  Tier 2 transactions tests/tier2/transactions/transactGet.test.ts:290

• TransactGetItems - ConsumedCapacity INDEXES breakdown includes the table read capacity units

  Tier 2 transactions tests/tier2/transactions/transactGet.test.ts:301

• TransactGetItems - projection matching nothing omits Item when the projection matches no attribute on a present item

  Tier 2 transactions tests/tier2/transactions/transactGet.test.ts:339

• TransactWriteItems - validation Put with a wrong-typed table key cancels with a ValidationError reason

  Tier 2 transactions tests/tier2/transactions/transactWrite.test.ts:725

• TransactWriteItems - validation Put with a non-scalar table key cancels with a ValidationError reason

  Tier 2 transactions tests/tier2/transactions/transactWrite.test.ts:725

• TransactWriteItems - validation Put with a wrong-typed index key cancels with a ValidationError reason

  Tier 2 transactions tests/tier2/transactions/transactWrite.test.ts:725

• TransactWriteItems - validation Put with a non-scalar index key cancels with a ValidationError reason

  Tier 2 transactions tests/tier2/transactions/transactWrite.test.ts:725

• TransactWriteItems - validation Update setting a wrong-typed index key cancels with a ValidationError reason

  Tier 2 transactions tests/tier2/transactions/transactWrite.test.ts:725

• TransactWriteItems - validation Update setting a non-scalar index key cancels with a ValidationError reason

  Tier 2 transactions tests/tier2/transactions/transactWrite.test.ts:725

• TransactWriteItems - validation Put with an empty-string index key is a top-level ValidationException

  Tier 2 transactions tests/tier2/transactions/transactWrite.test.ts:810

• TransactWriteItems - validation Update setting an empty-string index key is a top-level ValidationException

  Tier 2 transactions tests/tier2/transactions/transactWrite.test.ts:829

• TransactWriteItems - validation Update with a wrong-typed Key cancels with a ValidationError reason

  Tier 2 transactions tests/tier2/transactions/transactWrite.test.ts:725

• TransactWriteItems - validation Update with a non-scalar Key cancels with a ValidationError reason

  Tier 2 transactions tests/tier2/transactions/transactWrite.test.ts:725

• TransactWriteItems - validation Delete with a wrong-typed Key cancels with a ValidationError reason

  Tier 2 transactions tests/tier2/transactions/transactWrite.test.ts:725

• TransactWriteItems - validation Delete with a non-scalar Key cancels with a ValidationError reason

  Tier 2 transactions tests/tier2/transactions/transactWrite.test.ts:725

• TransactWriteItems - validation ConditionCheck with a wrong-typed Key cancels with a ValidationError reason

  Tier 2 transactions tests/tier2/transactions/transactWrite.test.ts:725

• TransactWriteItems - validation ConditionCheck with a non-scalar Key cancels with a ValidationError reason

  Tier 2 transactions tests/tier2/transactions/transactWrite.test.ts:725

• TransactWriteItems - ConsumedCapacity charges 2 write capacity units per item

  Tier 2 transactions tests/tier2/transactions/transactWrite.test.ts:1343

• TransactWriteItems - ConsumedCapacity: conditional, check, replay, cancel a passing conditional write costs the same 2 WCU/item as an unconditional one

  Tier 2 transactions tests/tier2/transactions/transactWrite.test.ts:1401

• TransactWriteItems - ConsumedCapacity: conditional, check, replay, cancel a standalone ConditionCheck action costs 2 write capacity units

  Tier 2 transactions tests/tier2/transactions/transactWrite.test.ts:1427

• TransactWriteItems - ConsumedCapacity: conditional, check, replay, cancel reports write capacity on the first call and read capacity on a same-token replay

  Tier 2 transactions tests/tier2/transactions/transactWrite.test.ts:1457

• BatchGetItem - exact error messages AttributesToGet with ProjectionExpression in a KeysAndAttributes block: full conflict error

  Tier 3 error-messages tests/tier3/error-messages/batchGetItem.test.ts:108

• BatchGetItem - exact error messages empty-binary lookup key: full empty-value message

  Tier 3 error-messages tests/tier3/error-messages/batchGetItem.test.ts:129

• BatchGetItem - exact error messages mixing ProjectionExpression on one table and AttributesToGet on another is rejected

  Tier 3 error-messages tests/tier3/error-messages/batchGetItem.test.ts:155

• BatchWriteItem - exact error messages wrong-typed table key: full schema-mismatch message

  Tier 3 error-messages tests/tier3/error-messages/batchWriteItem.test.ts:137

• BatchWriteItem - exact error messages non-scalar table key: full schema-mismatch message

  Tier 3 error-messages tests/tier3/error-messages/batchWriteItem.test.ts:137

• BatchWriteItem - exact error messages empty-string table key: full empty-value message

  Tier 3 error-messages tests/tier3/error-messages/batchWriteItem.test.ts:139

• BatchWriteItem - exact error messages empty-binary put-request key: full empty-value message

  Tier 3 error-messages tests/tier3/error-messages/batchWriteItem.test.ts:137

• BatchWriteItem - exact error messages empty-binary delete-request key: full empty-value message

  Tier 3 error-messages tests/tier3/error-messages/batchWriteItem.test.ts:137

• BatchWriteItem - exact error messages wrong-typed index key: full type-mismatch message

  Tier 3 error-messages tests/tier3/error-messages/batchWriteItem.test.ts:137

• BatchWriteItem - exact error messages non-scalar index key: full type-mismatch message

  Tier 3 error-messages tests/tier3/error-messages/batchWriteItem.test.ts:137

• BatchWriteItem - exact error messages empty-string index key: full secondary-index-key message

  Tier 3 error-messages tests/tier3/error-messages/batchWriteItem.test.ts:137

• BatchWriteItem - exact error messages empty-binary index key: full secondary-index-key message

  Tier 3 error-messages tests/tier3/error-messages/batchWriteItem.test.ts:137

• CreateTable - exact error messages PAY_PER_REQUEST with ProvisionedThroughput: full conflict message

  Tier 3 error-messages tests/tier3/error-messages/createTable.test.ts:252

• CreateTable - exact error messages GSI INCLUDE projection without NonKeyAttributes: full missing-attributes message

  Tier 3 error-messages tests/tier3/error-messages/createTable.test.ts:282

• CreateTable - exact error messages LSI INCLUDE projection without NonKeyAttributes: full missing-attributes message

  Tier 3 error-messages tests/tier3/error-messages/createTable.test.ts:321

• CreateTable - exact error messages StreamSpecification StreamEnabled:false with a StreamViewType: full conflict message

  Tier 3 error-messages tests/tier3/error-messages/createTable.test.ts:345

• DeleteItem - exact error messages mixing Expected with ConditionExpression: full conflict error

  Tier 3 error-messages tests/tier3/error-messages/deleteItem.test.ts:66

• DeleteItem - exact error messages empty-binary key value: full ValidationException message

  Tier 3 error-messages tests/tier3/error-messages/deleteItem.test.ts:86

• GetItem - exact error messages empty-binary key value: full ValidationException message

  Tier 3 error-messages tests/tier3/error-messages/getItem.test.ts:83

• PutItem - exact error messages NULL attr with false is accepted and normalises to NULL true

  Tier 3 error-messages tests/tier3/error-messages/putItem.test.ts:164

• PutItem - exact error messages empty-binary item key value: full ValidationException message

  Tier 3 error-messages tests/tier3/error-messages/putItem.test.ts:273

• PutItem - exact error messages empty-binary index key value: full secondary-index-key message

  Tier 3 error-messages tests/tier3/error-messages/putItem.test.ts:293

• Query - exact error messages Select SPECIFIC_ATTRIBUTES without ProjectionExpression: full required-projection message

  Tier 3 error-messages tests/tier3/error-messages/query.test.ts:231

• Scan - exact error messages ConsistentRead on a GSI: full consistent-reads-unsupported message

  Tier 3 error-messages tests/tier3/error-messages/scan.test.ts:174

• Scan - exact error messages Select SPECIFIC_ATTRIBUTES without ProjectionExpression: full required-projection message

  Tier 3 error-messages tests/tier3/error-messages/scan.test.ts:194

• TransactWriteItems - exact error messages Put wrong-typed table key: cancelled with full ValidationError reason

  Tier 3 error-messages tests/tier3/error-messages/transactWriteItems.test.ts:259

• TransactWriteItems - exact error messages Put non-scalar table key: cancelled with full ValidationError reason

  Tier 3 error-messages tests/tier3/error-messages/transactWriteItems.test.ts:259

• TransactWriteItems - exact error messages Put wrong-typed index key: cancelled with full ValidationError reason

  Tier 3 error-messages tests/tier3/error-messages/transactWriteItems.test.ts:259

• TransactWriteItems - exact error messages Put non-scalar index key: cancelled with full ValidationError reason

  Tier 3 error-messages tests/tier3/error-messages/transactWriteItems.test.ts:259

• TransactWriteItems - exact error messages Update wrong-typed index key: cancelled with full ValidationError reason

  Tier 3 error-messages tests/tier3/error-messages/transactWriteItems.test.ts:259

• TransactWriteItems - exact error messages Update non-scalar index key: cancelled with full ValidationError reason

  Tier 3 error-messages tests/tier3/error-messages/transactWriteItems.test.ts:259

• TransactWriteItems - exact error messages Put empty-string table key: top-level ValidationException

  Tier 3 error-messages tests/tier3/error-messages/transactWriteItems.test.ts:282

• TransactWriteItems - exact error messages Put empty-string index key: top-level ValidationException

  Tier 3 error-messages tests/tier3/error-messages/transactWriteItems.test.ts:280

• TransactWriteItems - exact error messages Update empty-string index key: top-level ValidationException

  Tier 3 error-messages tests/tier3/error-messages/transactWriteItems.test.ts:280

• TransactWriteItems - exact error messages Update empty-string Key: top-level empty-value message

  Tier 3 error-messages tests/tier3/error-messages/transactWriteItems.test.ts:282

• TransactWriteItems - exact error messages Delete empty-string Key: top-level empty-value message

  Tier 3 error-messages tests/tier3/error-messages/transactWriteItems.test.ts:282

• TransactWriteItems - exact error messages ConditionCheck empty-string Key: top-level empty-value message

  Tier 3 error-messages tests/tier3/error-messages/transactWriteItems.test.ts:282

• TransactWriteItems - exact error messages Update wrong-typed Key: cancelled with schema-mismatch reason

  Tier 3 error-messages tests/tier3/error-messages/transactWriteItems.test.ts:259

• TransactWriteItems - exact error messages Update non-scalar Key: cancelled with schema-mismatch reason

  Tier 3 error-messages tests/tier3/error-messages/transactWriteItems.test.ts:259

• TransactWriteItems - exact error messages Delete wrong-typed Key: cancelled with schema-mismatch reason

  Tier 3 error-messages tests/tier3/error-messages/transactWriteItems.test.ts:259

• TransactWriteItems - exact error messages Delete non-scalar Key: cancelled with schema-mismatch reason

  Tier 3 error-messages tests/tier3/error-messages/transactWriteItems.test.ts:259

• TransactWriteItems - exact error messages ConditionCheck wrong-typed Key: cancelled with schema-mismatch reason

  Tier 3 error-messages tests/tier3/error-messages/transactWriteItems.test.ts:259

• TransactWriteItems - exact error messages ConditionCheck non-scalar Key: cancelled with schema-mismatch reason

  Tier 3 error-messages tests/tier3/error-messages/transactWriteItems.test.ts:259

• TransactWriteItems - exact error messages Put empty-binary item key: top-level empty-value message

  Tier 3 error-messages tests/tier3/error-messages/transactWriteItems.test.ts:280

• TransactWriteItems - exact error messages Update empty-binary Key: top-level empty-value message

  Tier 3 error-messages tests/tier3/error-messages/transactWriteItems.test.ts:280

• TransactWriteItems - exact error messages Delete empty-binary Key: top-level empty-value message

  Tier 3 error-messages tests/tier3/error-messages/transactWriteItems.test.ts:280

• TransactWriteItems - exact error messages ConditionCheck empty-binary Key: top-level empty-value message

  Tier 3 error-messages tests/tier3/error-messages/transactWriteItems.test.ts:280

• TransactWriteItems - exact error messages Put empty-binary index key: top-level ValidationException

  Tier 3 error-messages tests/tier3/error-messages/transactWriteItems.test.ts:280

• TransactWriteItems - exact error messages Update empty-binary index key: top-level ValidationException

  Tier 3 error-messages tests/tier3/error-messages/transactWriteItems.test.ts:280

• UpdateItem - exact error messages empty-binary key value: full ValidationException message

  Tier 3 error-messages tests/tier3/error-messages/updateItem.test.ts:208

• UpdateItem - exact error messages empty-binary index key value: full secondary-index-key message

  Tier 3 error-messages tests/tier3/error-messages/updateItem.test.ts:230

• Item size limit - number sizing a number-dominated item under 400KB succeeds (15000 numbers)

  Tier 3 limits tests/tier3/limits/itemSize.test.ts:232

• Key-value length limits rejects a partition key over the 2048-byte limit on write

  Tier 3 limits tests/tier3/limits/keyLength.test.ts:19

• Key-value length limits rejects an over-limit partition key on the read path

  Tier 3 limits tests/tier3/limits/keyLength.test.ts:29

• Nesting depth - 32-level document limit rejects a stored attribute nested 32 levels (leaf at level 33)

  Tier 3 limits tests/tier3/limits/nestingDepth.test.ts:48

• Nesting depth - 32-level document limit rejects a 32-level ExpressionAttributeValue with ValidationException

  Tier 3 limits tests/tier3/limits/nestingDepth.test.ts:92

• Number precision - DynamoDB number limits and edge cases rejects arithmetic that overflows the supported number magnitude

  Tier 3 limits tests/tier3/limits/numberPrecision.test.ts:404

• CreateTable - validation ordering rejects an invalid BillingMode on its own

  Tier 3 validation-ordering tests/tier3/validation-ordering/createTable.test.ts:150

• Non-existent index - error surface Scan on a non-existent index reports ValidationException

  Tier 3 validation-ordering tests/tier3/validation-ordering/index.test.ts:47

• Non-existent index - error surface UpdateTable deleting a non-existent GSI reports ResourceNotFoundException

  Tier 3 validation-ordering tests/tier3/validation-ordering/index.test.ts:67

• Scan - validation ordering rejects a negative Segment

  Tier 3 validation-ordering tests/tier3/validation-ordering/scan.test.ts:75

• UpdateItem - validation ordering rejects invalid ReturnValues (UpdateItem reports the first enum error)

  Tier 3 validation-ordering tests/tier3/validation-ordering/updateItem.test.ts:47